Launch of the automatic irrigation system in spring in Nessebar

Spring is the time of awakening of nature, the time when every gardener and florist strives to revive their corner of the earth after a long winter. But what if your garden depends on an automatic irrigation system? How to properly and safely de-preserve and start the automatic irrigation system in the spring? The specialists of the Florial Garden Center, who know all the intricacies of this process, come to the rescue.

Timely maintenance of automatic irrigation is the key to extending the service life of the system. Maintaining the health and beauty of your garden with the help of effective irrigation technology is the main goal. Experts recommend diagnosing, adjusting or cleaning the automatic irrigation system at least twice a year. This is the minimum number, but quite sufficient to maintain the system in working order.

Preservation of the automatic irrigation system in the fall

In the fall, disconnection and preservation are carried out to avoid problems associated with winter frosts - disconnect the pump, drain and clean the tank, and blow out the pipes with a compressor.

Spring launch of the automatic irrigation system in Sunny Beach

The Florial Garden Center offers the following recommendations for de-preservation of the irrigation system. First of all, do not rush - the irrigation system equipment is extremely sensitive to cold. Wait for a stable air temperature of 3-5 degrees above zero. In the Nessebar region, this is usually mid- to late March. At this time, you can carry out preparatory work, such as checking the stability of the power supply, inspecting the components for damage, cleaning the system from possible contamination, and deciding whether to start the system yourself or with the help of specialists.

Preparation and first activation of the automatic irrigation system

Setting up automatic irrigation in the spring includes a process of competent de-preservation. This stage is carried out in the following order:

• the pumping station is installed in its place,

• cleaning or replacing the filter elements, they ensure the purity of the water entering the system and prevent possible breakdowns of other elements of the system. Filters are installed on various system components, such as water intake pipes, pumps and nozzles, and require cleaning at startup;

• the container (tank) is filled with water, it is possible that the internal walls and bottom of the tank need to be washed and cleaned of mud deposits to avoid breakdowns and unforeseen problems in the future;

• the condition of the float valve or tank filling sensors is necessarily checked;

• the irrigation system is turned on for the first time in the spring, the tap of the pipeline for supplying water to the automatic irrigation system is opened. The pump should turn on, fill the main line to the electromagnetic valves and hydrants;

• sequential switching on of each irrigation line and alternately opening and closing all hydrants and taps on the irrigation main in order to release air;

• checking the tightness of the automatic irrigation system - monitoring the stability of the pressure in the system after turning off the pump.

The first turn on of the automatic irrigation in the spring may be accompanied by some problems, such as possible blockages or leaks. However, with proper preparation and implementation of all the necessary procedures, your irrigation system will be ready for the new season, and your garden will delight you with the beauty and health of the plants.

Diagnostics and adjustment of the automatic irrigation system in Nessebar

• connect the irrigation control panel, check each irrigation zone, turning it on according to the program from the computer;

• adjust the automatic irrigation program, set it up for spring irrigation;

• during the period of inactivity in winter, the sprinklers could have shifted, and the nozzles could have become clogged, it is necessary to adjust each sprinkler and nozzle;

• if the water supply is insufficient, it may be necessary to replace the sprinklers and rotors, nozzles;

• the sector and radius of irrigation are adjusted manually with a special tool, with the irrigation running;

After a thorough diagnosis of the automatic irrigation system, troubleshooting the detected faults and setting up all the parameters, your automatic irrigation is ready for work. Spring de-preservation was successful!

And remember that you can always entrust this difficult work to professionals. The Florial Garden Center has been installing and servicing automatic irrigation systems in the Nessebar region and the region for over 20 years. We have installed more than 100 km of pipes and over 20,000 sprinklers. Autumn conservation and spring launch of automatic irrigation are just a part of our services that we offer as part of long-term cooperation.

Approximate cost of launching an automatic irrigation system in spring in Sunny Beach

Launching an automatic irrigation system in spring is an important stage in preparing your site for the new season. Uniform watering of plants, their health and growth depend on the correct setup of the system. Our studio offers professional services for launching automatic irrigation, adapted to the needs of your site.

Cost of launching irrigation in Nessebar:

• Up to 6 acres - from 150 leva

• More than 6 acres - the cost is calculated individually depending on the complexity of the system.

What affects the final cost of de-preservation of the irrigation system in Ravda?

• Area of ​​​​the irrigation system. The larger the site and system, the more time and effort is required to configure them.

• Location of the site. If access to the site or water source is difficult, this may affect the costs.

• Additional works:

Installation or testing of pumping equipment – ​​+60 lev.

Filling the water tank to start the system – +30 lev per 1 m3.

Why is it important to start the system on time?

Spring start-up allows you to make sure that the irrigation system is working properly after winter. We check every detail:

Condition of pipelines and nozzles;

Operation of pumps and filters;

Setting up irrigation zones for uniform irrigation.

In addition, we eliminate minor faults on site so that you can enjoy uninterrupted operation of the system all season.

Our contacts:

To get an estimate of the cost of work on the spring start-up of the automatic irrigation system, contact us at the following Contacts:

🌐 Our website: www.drop.od.ua

📧 Email: omaraandrey@gmail.com

📞 Phone: +359876777902